Martin Baylis

Engineering

Model Boilers

Martin Baylis Engineering produces a range of boilers to suit the modeller. Boilers are supplied complete including all expected boiler furniture, funnel and are clad with ceramic insulation and either wood or metal cladding complete with brass boiler bands. Every effort has been made to simulate boilers of the age in as much detail as possible.

Kingdon Vertical Boiler

Martin Baylis Engineering vertical boiler based on the Simpson Strickland Kingdon Boiler. As many features as possible have been retained from the prototype. These include a dummy fire door, bottle siphon pressure gauge, copper dome at the base of the funnel, brass feature to the top of the funnel, wood cladding and brass boiler bands.
The boiler is complete with super heater (steam drier), steam valve, pressure gauge and siphon, safety relief valve, water gauge and burner.
A novel feature is that the exhaust passes through the boiler casing and into the top of the vertical fire tube thus avoiding the need for unsightly pipe work on top of the boiler. A number of spare bushes are provided in the event the modeller would like to fit accessories, whistle, check valve and by-pass, gat attenuator etc.

Vertical Boiler Model

Marine Vertical Boiler

The unit is a marine vertical flue boiler with cross tubes and internal horizontal tube. The boiler is of all copper construction with the exception of the brass mounting plate at the base, all bushes and ferules are of bronze. It is designed for gas firing by butane/propane mix.
The boiler is supplied already clad in ceramic fibre insulation and planked in walnut wood and fitted with brass boiler bands.

Vertical Boiler Model

Exhaust Extension

View from above, the exhaust extension can be seen at the top of the funnel, this prevents the exhaust gasses drawing the flame from the burner. Decorative features such as the copper dome and brass surround can also be seen.

Vertical Boiler Model
TECHNICAL SPECIFICATIONS
OPERATING PRESSURE: – 45 p.s.i ~ 3.0 Bar
MAXIMUM PERMISSIBLE PRESSURE: – 60 p.s.i ~ 4.0 Bar
SAFETY VALVE RELIEF PRESSURE: – 60 p.s.i ~ 4.0 Bar
WEIGHT EMPTY INCLUDING FITTINGS: – 1.65 Kilos
INTERNAL VOLUME: 0.67 Litres
HEIGHT: – 125 mm (TO TOP OF COPPER DOME
MAX DIAMETER: – 118 mm

3″ Vertical Boiler

Martin Baylis Engineering 3” Vertical Boiler is intended to replicate as much as is practical a small vertical boiler of the age. It has many features enjoyed by its big brother the Kingdon boiler, including copper dome with brass surround, dummy fire door, concealed exhaust, brass trim to top of the funnel, bottle siphon and spare bushing for accessories.

Model Kingdon Vertical Boiler

3″ Vertical Boiler

The unit is a marine vertical flue boiler with cross tubes and internal horizontal tube. The boiler has copper top and bottom and a rolled nickel silver wrapper making the boiler of light construction enabling it to be used in models of limited displacement. All bushes and ferules are of bronze. It is designed for gas firing by butane/propane mix.
The boiler is supplied already clad in ceramic fibre insulation and planked in walnut wood and fitted with brass boiler bands.

Marine Model Vertical Boiler

3″ Boiler Exhaust Extension

View from above, the exhaust extension can be seen at the top of the funnel, this prevents the exhaust gasses drawing the flame from the burner. Decorative features such as the copper dome and brass surround can also be seen.

Model Vertical Boiler
3" TECHNICAL SPECIFICATIONS
OPERATING PRESSURE: – 30 or 45 p.s.i ~ 2 or 3.0 Bar
MAXIMUM PERMISSIBLE PRESSURE: – 60 p.s.i ~ 4.0 Bar
SAFETY VALVE RELIEF PRESSURE: – 45 or 60 p.s.i ~ 3 or 4.0 Bar
WEIGHT EMPTY INCLUDING FITTINGS: – 1.24 Kg
INTERNAL VOLUME: 0.56 Litres
HEIGHT: – 170 mm (TO TOP OF COPPER DOME)
MAX DIAMETER: – 88 mm

Horizontal Kingdon Boilers

3″ Horizontal Boilers

Martin Baylis Engineering 3” horizonal boiler is intended to replicate horizontal boilers of the age. The boiler features all expected boiler furniture including ceramic burner. The boiler comes with ceramic felt insulation with a painted aluminium wrapper and brass boiler bands, a stand, funnel, safety valve extension if required.

3” horizonal model steam boiler

The unit is a marine centre flue boiler with cross tubes, internal vertical flu and return tube. The boiler Features a nickel silver wrapper but is otherwise of all copper construction with the exception of brass fire tube blanking plates and brass funnel location. All bushes and ferules are of bronze. It is designed for gas firing by butane/propane mix. The stand is manufactured from painted brass.
Image showing pressure gauge and siphon, water sight glass, steam valve and vacant bush, along the spine of the boiler the filler, steam dome, safety valve extension and funnel can be seen.

3” horizonal model steam boiler

Image showing ceramic burner, vacant bushings for accessories and funnel base.

3” horizonal model steam boiler

Image showing from left to right the steam valve, filler bung, steam dome, safety valve and extension, funnel and ceramic burner.

3” horizonal model steam boiler
TECHNICAL SPECIFICATION
OPERATING PRESSURE: – 30 or 45 p.s.i ~ 2 or 3.0 Bar
MAXIMUM PERMISSIBLE PRESSURE: – 60 p.s.i ~ 4.0 Bar
SAFETY VALVE RELIEF PRESSURE: – 45 or 60 p.s.i ~ 3 or 4.0 Bar
WEIGHT EMPTY INCLUDING FITTINGS: – 1.275 Kg
WEIGHT FULL 1.775 Kg
INTERNAL VOLUME: 0.5 Litres
DIAMETER (with cladding) : – 80 mm
LENGTH (boiler casing):- 160mm

3.5″ Horizontal Boilers

Martin Baylis Engineering 3.5” horizontal model steam boiler is intended to replicate horizontal boilers of the age. The boiler features all expected boiler furniture including ceramic burner. The boiler comes with ceramic felt insulation with a painted aluminium wrapper and brass boiler bands, a stand, funnel, safety valve extension if required. The funnel can be positioned and adapted for the models’ needs, two funnel positions are available, positioned at the forward burner end of the boiler and one positioned centrally. Funnels can be plain black as seen here more for models with removable superstructure or can be a white finish with brass top trim for an open launch.

3.5" horizontal steam boiler

The unit is a marine centre flue boiler with cross tubes, internal vertical flu and return tube. The boiler is of all copper construction with the exception of brass fire tube blanking plates and brass funnel location. All bushes and ferules are of bronze. It is designed for gas firing by butane/propane mix. The stand is manufactured from anodised aluminium and stainless steel.

3.5" horizontal steam boiler

Image showing pressure gauge and siphon, water sight glass, steam valve and vacant bush, along the spine of the boiler the filler, steam dome, safety valve extension and funnel can be seen

3.5" horizontal steam boiler

Image showing ceramic burner, vacant bushings for accessories and funnel base.

3.5" horizontal steam boiler

Image showing ceramic burner, vacant bushings for accessories and funnel base.

Horizontal-steam-boiler-options

This shows the funnel in the alternative central position on the horizontal boiler.

horizonal model steam boiler centre funnel
TECHNICAL SPECIFICATION
OPERATING PRESSURE: 45p.s.i~3.0Bar
MAXIMUM PERMISSIBLE PRESSURE: 60p.s.i~4.0Bar
SAFETY VALVE RELIEF PRESSURE: 60p.s.i~4.0Bar
WEIGHT EMPTY INCLUDING FITTINGS: 1.7Kilos
INTERNAL VOLUME: 0.7Litres
LENGTH: 160mm
DIAMETER (with cladding): 95mm

Get in Contact

We would love to discuss your needs with you

info@model-steam-engines.com